Eglu HUB
- The communication gateway which can be
directly plugged into a wall socket. - It connects to the internet via home’s Wi-Fi
router. - The whole setup takes less than 2 minutes and
can be done through the eGlu APP.
Smart Plug 6A converts existing wall socket into a remote controlled switch. Any appliance which
takes a maximum load current of 6A can be used with this plug.
Examples: Lamps,Table Fans, Coffee Maker, Decorative Lights. The plug also has a push button
which can be used for local on/off control.
Yale Lock Controller is designed to remotely operate your Yale locks which are compatible with the K-type or N-type Yale receiver/transceiver modules. The Yale receiver
module is installed in the lock and the Yale transmitter module is interfaced with the
YLC, which also provides power to the transmitter module.
In-wall Triple Switch Module allows automation of regular lights, power sockets and
fans. IWS-3S comes with three switches of 6A rating. It is installed behind the existing
switch plate and works in parallel with the mechanical switches.
Panic Alarm produces loud sound when turned on. It can be activated based on various
events like intrusion, opening of a door or pressing of the panic button on the TAG. Panic
Alarm is powered by batteries and can be conveniently placed on any flat surface or
hang on a wall.
Gate Controller lets you control your motorized gate. The controller is connected in parallel to the manual gate open/close switch point. The Gate Controller has 3 relay outputs which provides a momentary pulse.
Sensor Monitor is designed to convert an existing low power sensor like Motion Glass
Break Sensor etc. into a wireless sensor. The only requirement is that the wired sensor
should have an ‘NO/NC’ trigger. SMLV can be powered from the same DC source which
is powering the sensor, mostly a battery. SMLV can monitor three ‘NO/NC’ Inputs. ‘NO’
connection is recommended as it increases the battery life.
Smart Plug 16A can we used to remotely control or automate high power appliances like
geysers, air conditioners and motor pumps. The plug also has a push button which can
be used for local on/off control.
Dual Relay Controller is a general purpose automation device. It contains two relays with
voltage rating of 220V and current rating of 6A. The relays can take both AC and DC
inputs for the given ratings. Dual Relay Controller also has the option to connect physical
AC switches for the local control of the relays.